Join Now
International Automotive Technicians Network

P0328 Diagnostic Trouble Code Discussion for December 2011

Knock Sensor 1 Circuit High Voltage (Bank 1)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0328
Help Request Posted
2004 Jaguar Vanden Plas 4.2L MIL Lamp on VIN: SAJWA74C64
P0328: Knock sensor ckt 1 high. My concern is the Evap codes. They will reset in 3-4 days of driving.I have tested the gas cap. I have smoke tested this vehicle Evap system. I can not find the leak. It loses pressure but no smoke shows up anywhere. I even tried smoke testing from the gas fil...
December 02, 2011
2007 Toyota RAV4 Limited 2.4L MIL Lamp on VIN: JTMBD31V67
P0328: Knock Sensor 1 Circuit High Input (Bank 1). Replaced the engine and now the VSC/4WD and MIL light is on and the accleator doesnot work at all idles fine, checked every thing twice and cleared codes but they come back within 10 seconds of starting the vehicle. I think I am stuck and would need your help ...
December 18, 2011
2004 Jaguar Vanden Plas 4.2L MIL Lamp on VIN: SAJWA74C64
P0328: Knock sensor ckt 1 high. My concern is the Evap codes. They will reset in 3-4 days of driving.I have tested the gas cap. I have smoke tested this vehicle Evap system. I can not find the leak. It loses pressure but no smoke shows up anywhere. I even tried smoke testing from the gas fil...
December 02, 2011
2007 Toyota RAV4 Limited 2.4L MIL Lamp on VIN: JTMBD31V67
P0328: Knock Sensor 1 Circuit High Input (Bank 1). Replaced the engine and now the VSC/4WD and MIL light is on and the accleator doesnot work at all idles fine, checked every thing twice and cleared codes but they come back within 10 seconds of starting the vehicle. I think I am stuck and would need your help ...
December 18, 2011