P0320 Diagnostic Trouble Code Discussion for August 2011
No Crank Reference Signal To PCM
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0320
| Help Request | Posted | |
| 1997 Ford Mustang GT 4.6L Cuts out VIN: 1FALP45X7V P0320: Loss of ignition. Gentelmen, This Mustang has a distinct ignition cut out at around 40mph under cruise condition. It always runs good under load and decel. The tach shows that the engine stumbles when it occurs, it drops and then comes right back. I have changed the crank senso... |
August 02, 2011 | |
| 1998 Chrysler Town & Country LX 3.8L No Start VIN: 1C4GP64L0W P0320: No Crank Reference Signal To PCM. ... came in as a not start, scanned system and found trouble code p0320, No Crank refernce at pcm. We replaced the sensor and still no start. I test the 8 volt supply and i have that, aswell as good sensor ground, and good supply voltage. replaced pcm and stil... |
August 09, 2011 | |
| 2001 Chrysler PT Cruiser Limited 2.4L Cuts out VIN: 3C8FY4BB41 P0320: No Crank Reference Signal To PCM. car shuts off in drive only, on acceleration. will crank but not start. loses 8 volt feed to cam and crank sensors. if I cut the feed wire out of the pcm, the voltage is still available. touching the wire on again will get my sensor readings to come back but n... |
August 23, 2011 |
