Join Now
International Automotive Technicians Network

P0341 Diagnostic Trouble Code Discussion for July 2011

CMP Sensor Performance


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0341
Help Request Posted
2003 Saturn Vue 3.0L Poor Idle Quality, Hesitation, MIL Lamp on VIN: 5GZCZ63B43
P0341: Camshaft Position Sensor Performance. ... she came in just for some simple service work, Timing belt and water pump, the job seemed to go well, when I started the vehicle, I first notice an extended crank that wasn't there previously, the car does start but runs rough. Also very sluggish accelerat...
July 14, 2011
1995 GMC Jimmy SLE 4.3L Hesitation, Surge, MIL Lamp on VIN: 1GKDT13W4S
P0341: Cam sensor Magnetic interferance. ... hesitates and runs rough and bucks.I see a slight fluctuation in the tach at idle hot only.Cleared all codes and code P0341 REPEATED.I've relocated the harness from any RFI.Has anyone ran into this code or fault? Thanks ...
July 25, 2011
2004 Dodge Ram 2500 Truck SLT 5.9L Surge VIN: 3D7KU28C14
P0341: Camshaft Position Lost. This truck has a cam sensor code that sets. It has an intermittant surge or jerk while driving. Can a cam sensor on this engine cause this? Where is it. Mitchell wiring shows a crank and cam sensor but can't find the cam sensor. Thanks Randy.
July 26, 2011
2004 Honda Accord EX 2.4L Poor Idle Quality, Stall, Misfire, MIL Lamp on VIN: 1HGCM55684
P0341: CMP Sensor And CKP Sensor - Incorrect Phase Detected. With the checks I've done I can see the timing advance is maxed out at 25 degrees, That is the max the VTC can adjust. I've changed the oil and added a flush to try and clean it out. It runs a little better but all 4 cylinders are misfiring and the timing is s...
July 28, 2011
2003 Saturn Vue 3.0L Poor Idle Quality, Hesitation, MIL Lamp on VIN: 5GZCZ63B43
P0341: Camshaft Position Sensor Performance. ... she came in just for some simple service work, Timing belt and water pump, the job seemed to go well, when I started the vehicle, I first notice an extended crank that wasn't there previously, the car does start but runs rough. Also very sluggish accelerat...
July 14, 2011
1995 GMC Jimmy SLE 4.3L Hesitation, Surge, MIL Lamp on VIN: 1GKDT13W4S
P0341: Cam sensor Magnetic interferance. ... hesitates and runs rough and bucks.I see a slight fluctuation in the tach at idle hot only.Cleared all codes and code P0341 REPEATED.I've relocated the harness from any RFI.Has anyone ran into this code or fault? Thanks ...
July 25, 2011
2004 Dodge Ram 2500 Truck SLT 5.9L Surge VIN: 3D7KU28C14
P0341: Camshaft Position Lost. This truck has a cam sensor code that sets. It has an intermittant surge or jerk while driving. Can a cam sensor on this engine cause this? Where is it. Mitchell wiring shows a crank and cam sensor but can't find the cam sensor. Thanks Randy.
July 26, 2011
2004 Honda Accord EX 2.4L Poor Idle Quality, Stall, Misfire, MIL Lamp on VIN: 1HGCM55684
P0341: CMP Sensor And CKP Sensor - Incorrect Phase Detected. With the checks I've done I can see the timing advance is maxed out at 25 degrees, That is the max the VTC can adjust. I've changed the oil and added a flush to try and clean it out. It runs a little better but all 4 cylinders are misfiring and the timing is s...
July 28, 2011