Join Now
International Automotive Technicians Network

P1280 Diagnostic Trouble Code Discussion for February 2011

Accelerator Pedal Position Sensor 2 Circuit Malfunction


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P1280
Help Request Posted
2000 Ford F-350 Super Duty Lariat 7.3L Cuts out, MIL Lamp on VIN: 1FTSX30F9Y
P1280: Injection Control System Pressure Out-Of-Range Low. Truck came in with a code P1280, on my scanner I see the icp voltage varing from 0 to 1 volt, pressure is at aprox 475 at idle, truck surges and occasionly stalls. I replace the sensor and the connector, on the first road test it was fine, then started acting ...
February 10, 2011
2000 Ford F-350 Super Duty Lariat 7.3L Cuts out, MIL Lamp on VIN: 1FTSX30F9Y
P1280: Injection Control System Pressure Out-Of-Range Low. Truck came in with a code P1280, on my scanner I see the icp voltage varing from 0 to 1 volt, pressure is at aprox 475 at idle, truck surges and occasionly stalls. I replace the sensor and the connector, on the first road test it was fine, then started acting ...
February 11, 2011
2000 Ford F-350 Super Duty Lariat 7.3L Cuts out, MIL Lamp on VIN: 1FTSX30F9Y
P1280: Injection Control System Pressure Out-Of-Range Low. Truck came in with a code P1280, on my scanner I see the icp voltage varing from 0 to 1 volt, pressure is at aprox 475 at idle, truck surges and occasionly stalls. I replace the sensor and the connector, on the first road test it was fine, then started acting ...
February 10, 2011
2000 Ford F-350 Super Duty Lariat 7.3L Cuts out, MIL Lamp on VIN: 1FTSX30F9Y
P1280: Injection Control System Pressure Out-Of-Range Low. Truck came in with a code P1280, on my scanner I see the icp voltage varing from 0 to 1 volt, pressure is at aprox 475 at idle, truck surges and occasionly stalls. I replace the sensor and the connector, on the first road test it was fine, then started acting ...
February 11, 2011