Join Now
International Automotive Technicians Network

P0018 Diagnostic Trouble Code Discussion for October 2010

Camshaft Position-Crankshaft Position (Bank 2 Sensor A)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0018
Help Request Posted
2008 Mercury Sable 3.5L MIL Lamp on VIN: 1MEHM42W08
P0018: crankshaft position-camshaft correlation-bank 2 sensor a. ... with codes p0018 and p0021.i have replaced the VCT solenoids and the trouble codes still pop up intermittently.everything looks fine on scanner VCTADV/VCTADV2 pids are within specs.,voltage is good,checked all connecters.did Alldata pinpoint test,clear the...
October 04, 2010
2006 Kia Sedona LX 3.8L Poor Idle Quality, Surge, Misfire, MIL Lamp on VIN: KNDMB23386
P0018: Camshaft Position/Crankshaft Position Correlation (Bank 2 Sensor 'A'). Hey guys, got a 2006 Kia Sedona van here. Came in with 9 total codes stored, most for lean running conditions on both banks due to a ripped air intake boot. I have cleared codes and replaced the boot, but I have an interesting problem. I'm getting a cam/crank ...
October 27, 2010
2008 Mercury Sable 3.5L MIL Lamp on VIN: 1MEHM42W08
P0018: crankshaft position-camshaft correlation-bank 2 sensor a. ... with codes p0018 and p0021.i have replaced the VCT solenoids and the trouble codes still pop up intermittently.everything looks fine on scanner VCTADV/VCTADV2 pids are within specs.,voltage is good,checked all connecters.did Alldata pinpoint test,clear the...
October 04, 2010
2006 Kia Sedona LX 3.8L Poor Idle Quality, Surge, Misfire, MIL Lamp on VIN: KNDMB23386
P0018: Camshaft Position/Crankshaft Position Correlation (Bank 2 Sensor 'A'). Hey guys, got a 2006 Kia Sedona van here. Came in with 9 total codes stored, most for lean running conditions on both banks due to a ripped air intake boot. I have cleared codes and replaced the boot, but I have an interesting problem. I'm getting a cam/crank ...
October 27, 2010