Join Now
International Automotive Technicians Network

P0344 Diagnostic Trouble Code Discussion for September 2010

Camshaft Position Sensor Signal Intermittent


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0344
Help Request Posted
2003 Chrysler PT Cruiser Touring 2.4L MIL Lamp on VIN: 3C4FY58B33
P0344: Camshaft Position Sensor Signal Intermittent. re accuring p0344 replaced cam sensor, measured infinet ohms cam is in sync found crank sensor sync out replaced and same problem accurs. do you have to perform cam crank sync, and if so can it be done without drbIII? thanks for any help
September 29, 2010
2005 Honda Odyssey EX 3.5L Poor Idle Quality, Hesitation, Cuts out, Stall, MIL Lamp on VIN: 5FNRL38785
P0344: Camshaft Position Sensor 'A' Intermittent Signal. Customer tells us this problem began right after timing belt job, never fails at the shop but always comes back with those 2 codes, have wiggled harness, tapped ecm and cranks sensor but no glitches, inspected harness, crank sensor and sensor ring all look ok,...
September 30, 2010
2003 Chrysler PT Cruiser Touring 2.4L MIL Lamp on VIN: 3C4FY58B33
P0344: Camshaft Position Sensor Signal Intermittent. re accuring p0344 replaced cam sensor, measured infinet ohms cam is in sync found crank sensor sync out replaced and same problem accurs. do you have to perform cam crank sync, and if so can it be done without drbIII? thanks for any help
September 29, 2010
2005 Honda Odyssey EX 3.5L Poor Idle Quality, Hesitation, Cuts out, Stall, MIL Lamp on VIN: 5FNRL38785
P0344: Camshaft Position Sensor 'A' Intermittent Signal. Customer tells us this problem began right after timing belt job, never fails at the shop but always comes back with those 2 codes, have wiggled harness, tapped ecm and cranks sensor but no glitches, inspected harness, crank sensor and sensor ring all look ok,...
September 30, 2010