Join Now
International Automotive Technicians Network

P0320 Diagnostic Trouble Code Discussion for September 2010

No Crank Reference Signal To PCM


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0320
Help Request Posted
2005 Kia Sedona LX 3.5L MIL Lamp on VIN: KNUDP13115
P0320: Ignition Failure Sensor Circuit Malfunction. I have this code P0320. The vehicle has no driveabliity concerns. Everything is normal except for the check engine light is illuminated and the tachometer does not work. The customer believes that that both problems started at the same time, but is not 100% su...
September 08, 2010
2000 Dodge Intrepid 2.7L No Start, Stall VIN: 2B3HD46RXY
P0320: No Crank Reference Signal To PCM. ... no-start condition. Owner said the vehicle shut off while driving and will now crank but won't start. The first thing I found was that the 5v and 8v signals at the crank sensor were being pulled away by a faulty cam sensor. Replaced the cam sensor and now ...
September 21, 2010
1996 Ford Ranger XLT 2.3L Poor Idle Quality, Hesitation, Cuts out, Stall, Misfire VIN: 1FTCR14A7T
P0320: Ignition PIP Signal. Crank sensor. Need a Little help here ford techs. I have checked All possible causes for what this engine is doing.fuel pressure,crank signal,firing order-both intake and exhaust,maf sensor,tps,and both o-2 sensors.all check out good.this engine is in a constant state of mi...
September 21, 2010
2005 Kia Sedona LX 3.5L MIL Lamp on VIN: KNUDP13115
P0320: Ignition Failure Sensor Circuit Malfunction. I have this code P0320. The vehicle has no driveabliity concerns. Everything is normal except for the check engine light is illuminated and the tachometer does not work. The customer believes that that both problems started at the same time, but is not 100% su...
September 08, 2010
2000 Dodge Intrepid 2.7L No Start, Stall VIN: 2B3HD46RXY
P0320: No Crank Reference Signal To PCM. ... no-start condition. Owner said the vehicle shut off while driving and will now crank but won't start. The first thing I found was that the 5v and 8v signals at the crank sensor were being pulled away by a faulty cam sensor. Replaced the cam sensor and now ...
September 21, 2010
1996 Ford Ranger XLT 2.3L Poor Idle Quality, Hesitation, Cuts out, Stall, Misfire VIN: 1FTCR14A7T
P0320: Ignition PIP Signal. Crank sensor. Need a Little help here ford techs. I have checked All possible causes for what this engine is doing.fuel pressure,crank signal,firing order-both intake and exhaust,maf sensor,tps,and both o-2 sensors.all check out good.this engine is in a constant state of mi...
September 21, 2010