P2617 Diagnostic Trouble Code Discussion for August 2010
Crankshaft Position Signal Output Circuit Malfunction
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P2617
| Help Request | Posted | |
| 2004 Ford E-450 Super Duty 6.0L Hesitation VIN: 1FDXE45P34 P2617: CKP Signal output circuitopen. Van Will Drop RPM under load @ about 3,000 Rpm Water in Fuel Light comes on & Glow plug light Rpm will drop under 2,000 rpm. APP will not respond till lights go out Cat was broken removed cat still have Drop in rpm fuel psi 55 all the time. |
August 10, 2010 | |
| 2004 Ford E-450 Super Duty 6.0L Hesitation VIN: 1FDXE45P34 P2617: CKP Signal output circuitopen. Van Will Drop RPM under load @ about 3,000 Rpm Water in Fuel Light comes on & Glow plug light Rpm will drop under 2,000 rpm. APP will not respond till lights go out Cat was broken removed cat still have Drop in rpm fuel psi 55 all the time. |
August 11, 2010 | |
| 2004 Ford F-350 Super Duty XLT 6.0L No Start, No Acceleration VIN: 1FTSX31P74 P2617: Crankshaft Position Output Circuit Malfunction. Truck will not accelerate most times,also no start every time after shutoff when condition occurs,will idle all day,has never stalled.All scanner readings ok (including app voltage) ok except engine load % reads 99.6%.Starts & accelerates normal if load % ... |
August 27, 2010 | |
| 2004 Ford F-350 Super Duty XLT 6.0L No Start, No Acceleration VIN: 1FTSX31P74 P2617: Crankshaft Position Output Circuit Malfunction. Truck will not accelerate most times,also no start every time after shutoff when condition occurs,will idle all day,has never stalled.All scanner readings ok (including app voltage) ok except engine load % reads 99.6%.Starts & accelerates normal if load % ... |
August 30, 2010 |
