
P0344 Diagnostic Trouble Code Discussion for July 2010
Camshaft Position Sensor Signal Intermittent
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0344
Help Request | Posted | |
2005 Jeep Wrangler Unlimited 4.0L Cuts out, Misfire VIN: 1JFA44S55P P0344: Camshaft Position Sensor Signal Intermittent. The question here is Why, not What. The problem with this Jeep is that the cam sensor/ oil pump drive is sloppy and causes an erratic reading.The problem is that there are no replacement currently available. My dealer says that there are 220 on intergalactic b... |
July 03, 2010 | |
2005 Chrysler PT Cruiser Classic 2.4L Hesitation, Surge, Cuts out, MIL Lamp on VIN: 3C4FY58B25 P0344: Camshaft Position Sensor Signal Intermittent. ... in the shop cant seem to fix it. The car came in with P0344 and the customer had replaced the Cam sensor. I have the OE sensor and have tried a third new Borg Warner and they all do the same thing. It runs fine when cold but after it warms up and rev about... |
July 06, 2010 | |
2005 Chrysler PT Cruiser Classic 2.4L Hesitation, Surge, Cuts out, MIL Lamp on VIN: 3C4FY58B25 P0344: Camshaft Position Sensor Signal Intermittent. ... in the shop cant seem to fix it. The car came in with P0344 and the customer had replaced the Cam sensor. I have the OE sensor and have tried a third new Borg Warner and they all do the same thing. It runs fine when cold but after it warms up and rev about... |
July 07, 2010 | |
2004 Jeep Liberty Renegade 3.7L Stall VIN: 1J4GL48K54 P0344: Camshaft Position Sensor Signal Intermittent. hey guys,i got this jeep that dies at idle or in the drive through after it gets hot.i am on the second aftermarket cam sensor,seems to fix for a couple weeks.i put the labscope on it and the freq.at idle is about 150-160htz.i had the meter hooked up to the 5v... |
July 15, 2010 | |
2004 Jeep Liberty Renegade 3.7L Stall VIN: 1J4GL48K54 P0344: Camshaft Position Sensor Signal Intermittent. hey guys,i got this jeep that dies at idle or in the drive through after it gets hot.i am on the second aftermarket cam sensor,seems to fix for a couple weeks.i put the labscope on it and the freq.at idle is about 150-160htz.i had the meter hooked up to the 5v... |
July 20, 2010 | |
2003 Chrysler PT Cruiser GT 2.4L MIL Lamp on, Limp mode VIN: 3C8FY78G13 P0344: Camshaft Position Sensor Signal Intermittent. Hello to all and thank you in advance. I have a 2003 PT Cruiser with a 2.4 Turbo automatic trans. Car come in with idle problem, intermittently going into limp mode and check engine light. I tuned car up plugs wires and plenum gasket by customer request. Car i... |
July 28, 2010 |