Join Now
International Automotive Technicians Network

P0014 Diagnostic Trouble Code Discussion for July 2010

Camshaft 2 Position Sensor Target Performance (Bank 1 Sensor 2)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0014
Help Request Posted
2004 BMW 325i 2.5L MIL Lamp on
P0014: exhaust cam retard set point not reached. ... timing up according to alldata's procedure. engine runs fine but after two short run cycles the check engine light comes on with the code p0014 for the exhaust cam timing. rechecked, timing lines up correct. I have tried a new cam sensor and swapping the c...
July 07, 2010
2008 Chrysler Sebring 2.4L MIL Lamp on VIN: 1C3LC46K58
P0014: bank1 cam 2 postion target preformance. This car cam in with MIL on and the two listed bank 1 camshaft 2 code listed. This car is only 2k out of warranty. I have not seen this problem on a chry. Have you Chry guys seen this? Mitchell talkes of a camshaft phaser. But there is no info on it. Thank Y...
July 07, 2010
2004 BMW 325i 2.5L MIL Lamp on
P0014: exhaust cam retard set point not reached. ... timing up according to alldata's procedure. engine runs fine but after two short run cycles the check engine light comes on with the code p0014 for the exhaust cam timing. rechecked, timing lines up correct. I have tried a new cam sensor and swapping the c...
July 08, 2010
1999 Volvo V70 X/C AWD 2.4L No Start, long cranking VIN: YV1LZ56D3X
P0014: camshaft position timing over advanced. Hi volvo techs out there. This V70 xc has an intermittent long crancking condition before it starts. Checked the fuel pressure and noticed that it drops to zero inmediately after shutting off the engine. There is supposed to have a fuel pressure regulator on t...
July 23, 2010
2007 Infiniti G35 3.5L MIL Lamp on VIN: JNKBV61E27
P0014: Exhaust Valve Timing Control Performance (Bank 1). ... P0014 and P0024 (exhaust valve timing control bank 1 and bank 2). Engine oil is full and engine oil has been changed to make sure the proper weight oil is in engine. Has anyone had any experience with these codes and can you help. I have put a lab scope on...
July 27, 2010
2004 BMW 325i 2.5L MIL Lamp on
P0014: exhaust cam retard set point not reached. ... timing up according to alldata's procedure. engine runs fine but after two short run cycles the check engine light comes on with the code p0014 for the exhaust cam timing. rechecked, timing lines up correct. I have tried a new cam sensor and swapping the c...
July 07, 2010
2008 Chrysler Sebring 2.4L MIL Lamp on VIN: 1C3LC46K58
P0014: bank1 cam 2 postion target preformance. This car cam in with MIL on and the two listed bank 1 camshaft 2 code listed. This car is only 2k out of warranty. I have not seen this problem on a chry. Have you Chry guys seen this? Mitchell talkes of a camshaft phaser. But there is no info on it. Thank Y...
July 07, 2010
2004 BMW 325i 2.5L MIL Lamp on
P0014: exhaust cam retard set point not reached. ... timing up according to alldata's procedure. engine runs fine but after two short run cycles the check engine light comes on with the code p0014 for the exhaust cam timing. rechecked, timing lines up correct. I have tried a new cam sensor and swapping the c...
July 08, 2010
1999 Volvo V70 X/C AWD 2.4L No Start, long cranking VIN: YV1LZ56D3X
P0014: camshaft position timing over advanced. Hi volvo techs out there. This V70 xc has an intermittent long crancking condition before it starts. Checked the fuel pressure and noticed that it drops to zero inmediately after shutting off the engine. There is supposed to have a fuel pressure regulator on t...
July 23, 2010
2007 Infiniti G35 3.5L MIL Lamp on VIN: JNKBV61E27
P0014: Exhaust Valve Timing Control Performance (Bank 1). ... P0014 and P0024 (exhaust valve timing control bank 1 and bank 2). Engine oil is full and engine oil has been changed to make sure the proper weight oil is in engine. Has anyone had any experience with these codes and can you help. I have put a lab scope on...
July 27, 2010