Join Now
International Automotive Technicians Network

P1140 Diagnostic Trouble Code Discussion for June 2010

Intake Valve Timing Control Position Sensor Circuit Malfunction (Bank 1)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P1140
Help Request Posted
2001 Nissan Pathfinder SE 3.5L MIL Lamp on VIN: JN8DR09YX1
P1140: Intake Valve Timming Solenoid B1. I have replaced intake valve timing solenoid and same code will set after test drive. Have also removed camshaft position sensor and checked for debris. None was found. The code is triggered when the ECM detects excessively high or low voltage from valve timmi...
June 16, 2010
2001 Nissan Pathfinder SE 3.5L MIL Lamp on VIN: JN8DR09YX1
P1140: Intake Valve Timming Solenoid B1. I have replaced intake valve timing solenoid and same code will set after test drive. Have also removed camshaft position sensor and checked for debris. None was found. The code is triggered when the ECM detects excessively high or low voltage from valve timmi...
June 20, 2010
2001 Nissan Pathfinder SE 3.5L MIL Lamp on VIN: JN8DR09YX1
P1140: Intake Valve Timming Solenoid B1. I have replaced intake valve timing solenoid and same code will set after test drive. Have also removed camshaft position sensor and checked for debris. None was found. The code is triggered when the ECM detects excessively high or low voltage from valve timmi...
June 16, 2010
2001 Nissan Pathfinder SE 3.5L MIL Lamp on VIN: JN8DR09YX1
P1140: Intake Valve Timming Solenoid B1. I have replaced intake valve timing solenoid and same code will set after test drive. Have also removed camshaft position sensor and checked for debris. None was found. The code is triggered when the ECM detects excessively high or low voltage from valve timmi...
June 20, 2010