× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network

P0123 Diagnostic Trouble Code Discussion for June 2010

Throttle Position Sensor/APPS High


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0123
Help Request Posted
2001 Dodge Dakota 3.9L Poor Idle Quality, Stall, MIL Lamp on VIN: 1B7GL22X81
P0123: Throttle Position Sensor Circuit High Voltage. ... me fits. I am 2nd tech to work on vehicle. Truck runs rough, wont idle, MIL on all the time, code P0123 TPS volts high. 1st tech swapped tps, no change. I ran tests above, concluded bad PCM. Changed PCM with used unit, no change. we are import shop, rarely...
June 10, 2010
2001 Dodge Dakota 3.9L Poor Idle Quality, Stall, MIL Lamp on VIN: 1B7GL22X81
P0123: Throttle Position Sensor Circuit High Voltage. ... me fits. I am 2nd tech to work on vehicle. Truck runs rough, wont idle, MIL on all the time, code P0123 TPS volts high. 1st tech swapped tps, no change. I ran tests above, concluded bad PCM. Changed PCM with used unit, no change. we are import shop, rarely...
June 11, 2010
2003 Saturn Vue 3.0L Surge VIN: 5GZCZ63B73
P0123: TP Sensor Circuit High Voltage. Customer brought vehicle in to our shop. Had several codes, listed above. We replaced a known bad ground going to the throttle body. Tested the tps sensors, at the pedal, tested good. Did continuity check between pcm and tps sensors, checks out ok. Checked the...
June 24, 2010
2001 Chrysler Town & Country LX 3.3L No Start, Stall, PCM failure VIN: 2C4GP44341
P0123: Throttle Position Sensor Circuit High Voltage. This van came to me first in April. It would not run. It had codes PO 117, 107 and 122. While testing it I found there was no 5V suppy from the PCM. I tested the harness and sensors and could find no problem. I replace the PCM. The van ran great for 2 months. ...
June 28, 2010