Join Now
International Automotive Technicians Network

P0108 Diagnostic Trouble Code Discussion for June 2010

Manifold Air Pressure Sensor Circuit High Voltage


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0108
Help Request Posted
2004 Dodge Ram 3500 Truck SLT 5.9L Hesitation, lacks power VIN: 3D7MU48C24
P0108: Inlet Air Pressure Sensor Voltage Too High. ok im new to working on diesels, so be kind I replaced map sensor and cleared codes, still no power, removed line that had been replaced and checked for obstructions non were found, reinstalled, and checked tubing from turbo, no leaks detected, now there are n...
June 15, 2010
2001 Chrysler Town & Country (Van) LX 3.3L No Start, Stall, PCM failure VIN: 2C4GP44341
P0108: Map high. This van came to me first in April. It would not run. It had codes PO 117, 107 and 122. While testing it I found there was no 5V suppy from the PCM. I tested the harness and sensors and could find no problem. I replace the PCM. The van ran great for 2 months. ...
June 28, 2010
2004 Dodge Ram 3500 Truck SLT 5.9L Hesitation, lacks power VIN: 3D7MU48C24
P0108: Inlet Air Pressure Sensor Voltage Too High. ok im new to working on diesels, so be kind I replaced map sensor and cleared codes, still no power, removed line that had been replaced and checked for obstructions non were found, reinstalled, and checked tubing from turbo, no leaks detected, now there are n...
June 15, 2010
2001 Chrysler Town & Country (Van) LX 3.3L No Start, Stall, PCM failure VIN: 2C4GP44341
P0108: Map high. This van came to me first in April. It would not run. It had codes PO 117, 107 and 122. While testing it I found there was no 5V suppy from the PCM. I tested the harness and sensors and could find no problem. I replace the PCM. The van ran great for 2 months. ...
June 28, 2010