Join Now
International Automotive Technicians Network

P0012 Diagnostic Trouble Code Discussion for June 2010

Camshaft Position 'A' Over-Retarded (Bank 1)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0012
Help Request Posted
2003 Audi A4 Quattro 1.8L MIL Lamp on VIN: WAUTC68EX4
P0012: Camshaft timing retarded. ... brought in for noise at back of engine and check engine light on. We replaced the cam-timing actuator and the engine was still noisy. We flushed the engine and then found we had no oil pressure. We then replaced the oil pump and pickup tube. The noise was...
June 04, 2010
2002 Mazda Miata 1.8L Cuts out, Stall VIN: JMINB35372
P0012: Camshaft Position Timing Over-Retarded. ... gurus. Car stalls when hot, must have hood down for higher temperature. When trying to restart, will not start right away, a little hesitation, a little stumbling then eventually will fire may run for a while or may stall right away. But definitely tempera...
June 28, 2010
2003 Audi A4 Quattro 1.8L MIL Lamp on VIN: WAUTC68EX4
P0012: Camshaft timing retarded. ... brought in for noise at back of engine and check engine light on. We replaced the cam-timing actuator and the engine was still noisy. We flushed the engine and then found we had no oil pressure. We then replaced the oil pump and pickup tube. The noise was...
June 04, 2010
2002 Mazda Miata 1.8L Cuts out, Stall VIN: JMINB35372
P0012: Camshaft Position Timing Over-Retarded. ... gurus. Car stalls when hot, must have hood down for higher temperature. When trying to restart, will not start right away, a little hesitation, a little stumbling then eventually will fire may run for a while or may stall right away. But definitely tempera...
June 28, 2010