Join Now
International Automotive Technicians Network

P0022 Diagnostic Trouble Code Discussion for May 2010

Camshaft Position 'A' Timing Over-Retarded (Bank 2)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0022
Help Request Posted
2005 Ford F-250 Super Duty XLT 5.4L Misfire VIN: 1FTSX21575
P0022: Exhaust cam retarded on bank 2. ... warm after a decel.It will reset the code P0022. The left cam is not returning to the base position even though the PCM is commanding it to. The oil pressure is within spec. 65 psi@ 2000 rpm and 23 psi @ idle. I did compare this to another Ford with a 5.4 ...
May 10, 2010
2007 Ford F-150 STX 4.6L Poor Idle Quality, Cuts out, Misfire, MIL Lamp on VIN: 1FTPW14V87
P0022: Intake Camshaft Position Timing Over Retarded (Bank 2). ... codes p0012,p0018,p0022 and p305.scanned vct sensors and found timing was showing 40.96(according to alldata)this in with in specs.when this truck gets to normal operating temp,its start to spark knock and run poor.sounds ...
May 27, 2010
2005 Ford F-250 Super Duty XLT 5.4L Misfire VIN: 1FTSX21575
P0022: Exhaust cam retarded on bank 2. ... warm after a decel.It will reset the code P0022. The left cam is not returning to the base position even though the PCM is commanding it to. The oil pressure is within spec. 65 psi@ 2000 rpm and 23 psi @ idle. I did compare this to another Ford with a 5.4 ...
May 10, 2010
2007 Ford F-150 STX 4.6L Poor Idle Quality, Cuts out, Misfire, MIL Lamp on VIN: 1FTPW14V87
P0022: Intake Camshaft Position Timing Over Retarded (Bank 2). ... codes p0012,p0018,p0022 and p305.scanned vct sensors and found timing was showing 40.96(according to alldata)this in with in specs.when this truck gets to normal operating temp,its start to spark knock and run poor.sounds ...
May 27, 2010