Join Now
International Automotive Technicians Network

P0011 Diagnostic Trouble Code Discussion for May 2010

Camshaft 1 Position Sensor Target Performance (Bank 1 Sensor 1)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0011
Help Request Posted
2002 Volkswagen Passat W8 4.0L Poor Idle Quality VIN: WVWUK63B52
P0011: bank 1 camshaftintake retard setpoint not reached over advanced. if you clear the codes and rev this engine to 2,500 and attempt to set the readiness for the camshafts (basic setting value blocks 094 and 096)the poo11 code immediatly returns. have performed output test for bank 1-4 camshaft adjustmant actuaters and all are ...
May 06, 2010
2006 Kia Spectra EX 2.0L MIL Lamp on VIN: KNAFE12116
P0011: Camshaft Position - Timing Over Advanced / System Performance. ... with service engine light code p0011. Checked oil level, ok, ohmed cam actuator, 9 ohms at 185 degrees, commanded with scanner and heard move. Went ahead and pulled out to verify movement, ok. camshaft position is 125 and never moves. Not familliar with th...
May 08, 2010
2003 Nissan Murano SL 3.5L MIL Lamp on, Noise VIN: JN8AZ08TX3
P0011: Intake Valve Timing Control Range/Performance (Bank 1). Car came in with a p0011 code for B1 VVT. I asked customer if it made any noise on startup? (Per iatn data base) Cust said it did not so I ordered the control sol. Cust dropped off car early to have the sol replace and when I started the car it made a rattling...
May 26, 2010
2002 Volkswagen Passat W8 4.0L Poor Idle Quality VIN: WVWUK63B52
P0011: bank 1 camshaftintake retard setpoint not reached over advanced. if you clear the codes and rev this engine to 2,500 and attempt to set the readiness for the camshafts (basic setting value blocks 094 and 096)the poo11 code immediatly returns. have performed output test for bank 1-4 camshaft adjustmant actuaters and all are ...
May 06, 2010
2006 Kia Spectra EX 2.0L MIL Lamp on VIN: KNAFE12116
P0011: Camshaft Position - Timing Over Advanced / System Performance. ... with service engine light code p0011. Checked oil level, ok, ohmed cam actuator, 9 ohms at 185 degrees, commanded with scanner and heard move. Went ahead and pulled out to verify movement, ok. camshaft position is 125 and never moves. Not familliar with th...
May 08, 2010
2003 Nissan Murano SL 3.5L MIL Lamp on, Noise VIN: JN8AZ08TX3
P0011: Intake Valve Timing Control Range/Performance (Bank 1). Car came in with a p0011 code for B1 VVT. I asked customer if it made any noise on startup? (Per iatn data base) Cust said it did not so I ordered the control sol. Cust dropped off car early to have the sol replace and when I started the car it made a rattling...
May 26, 2010