P0021 Diagnostic Trouble Code Discussion for July 2009
Camshaft Position 'A' Timing Over-Advanced / System Performance (Bank 2)
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0021
| Help Request | Posted | |
| 2004 Nissan Maxima SL 3.5L MIL Lamp on, LIMP IN MODE VIN: 1N4BA41E64 P0021: Intake Valve Timing Control Range/Performance (Bank 2). in my initial diag i noticed excessive silicone on timing cover,i then proceeded with and oil flush and manual cleaning of the intake valve solenoids. i found at this time the b2 solenoid plunger is not actuating. i replaced the solenoid and took for a test dr... |
July 07, 2009 | |
| 2005 Nissan Maxima SL 3.5L MIL Lamp on VIN: 1N4BA41E35 P0021: Intake Valve Timing Control Range/Performance (Bank 2). hey fellows i have a real pos here...i got a maxima that keeps setting a code po22 vvt bank 2 problem..here is what ive got so far oil presure cold is 65psi when engine is warm presure is 24 psi..so im gonna say that this is ok as alldata says it is but someti... |
July 22, 2009 | |
| 2005 Nissan Maxima SL 3.5L MIL Lamp on VIN: 1N4BA41E35 P0021: Intake Valve Timing Control Range/Performance (Bank 2). hey fellows i have a real pos here...i got a maxima that keeps setting a code po22 vvt bank 2 problem..here is what ive got so far oil presure cold is 65psi when engine is warm presure is 24 psi..so im gonna say that this is ok as alldata says it is but someti... |
July 23, 2009 |
