P0341 Diagnostic Trouble Code Discussion for June 2009
CMP Sensor Performance
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0341
| Help Request | Posted | |
| 1995 Oldsmobile Cutlass Ciera 3.1L Cuts out, Stall, MIL Lamp on VIN: 1G3AJ55M9S P0341: cam sensor. ... Owner installed new cam sensor, I scanned it and still had code P0341. Checked wiring, Found OK. I installed new Crank sensor 24x. Now I have a code P0321 but no code P0341, Vehicle starts but mil will come on shortly aft... |
June 02, 2009 | |
| 1998 Chevrolet Cavalier 2.2L Misfire, MIL Lamp on VIN: 1G1JC5248W P0341: CMP Sensor Performance. Hi guys, I started out by replacing the crank sensor, which turned into a nightmare when it broke off during removal. Anyway the problem remained, so after reading thru the archives, I then replaced the plugs and wires to no avail. I checked the wires from t... |
June 03, 2009 | |
| 2003 Volkswagen Jetta GLS 1.8L no start VIN: 3VWSE69M53 P0341: valve timing. engine cranks as if timing belts off,pulled covers checked timing marks with balancer at #1 and flywheel. all marks dead on. pulled valve cover valve lifters on exhaust side are all down as if there was no oil pressure. pulled pan checked for sludge build up a... |
June 15, 2009 | |
| 1998 Saturn SL2 1.9L Surge, MIL Lamp on VIN: 1G8ZK5276W P0341: Camshaft Position Sensor Signal Performance. ... chart for p0341. the code is active the engine runs fine, says to remove j3 connector at PCM and remove circuit 633. reconnect to PCM and start engine for 1 min, with pin out of harness. ask if p0341 set and it dose not. but i now have 2 more codes p1620 c... |
June 17, 2009 |
