Join Now
International Automotive Technicians Network

P0341 Diagnostic Trouble Code Discussion for September 2008

CMP Sensor Performance


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0341
Help Request Posted
1995 Oldsmobile Cutlass Ciera 3.1L Hesitation, Cuts out, Misfire, MIL Lamp on VIN: 1G3AJ55M3S
P0341: camshaft position sensor extra cam pulses. ... at highway speeds with warm engine. can be easily duplicated in stall once warmed up. does not act up cold. service engine soon light comes on when acts up. code p0341 is present (cam sensor additional pulses). monitored cam sesnor signal on modis-signal g...
September 02, 2008
1997 Jeep Wrangler Sport 4.0L No Start VIN: 1J4FY19S7V
P0341: CMP sensor circuit problem. Vehicle cranks but no start after sitting for a period of time. Wait 1-2 days, vehicle starts fine and flags codes for CMP sensor and sometimes misfire #4. I have never personally seen this happen, only the codes. Replaced CKP and distributor, no change. Very ...
September 08, 2008
1997 Jeep Wrangler Sport 4.0L No Start VIN: 1J4FY19S7V
P0341: CMP sensor circuit problem. Vehicle cranks but no start after sitting for a period of time. Wait 1-2 days, vehicle starts fine and flags codes for CMP sensor and sometimes misfire #4. I have never personally seen this happen, only the codes. Replaced CKP and distributor, no change. Very ...
September 18, 2008
1995 Buick LeSabre Custom 3.8L No Start, Hesitation, Surge, Cuts out, Stall, MIL Lamp on VIN: 1G4HP52L88
P0341: cam crank sensor. ... codes p0341 and p1361 have replaced cam and crank sensors ign module no help
September 25, 2008
1994 Buick LeSabre Custom 3.8L Cuts out, Stall, MIL Lamp on VIN: 1G4HP52L3R
P0341: cam/crank error. Hi all, we have one here that we are at a loss on. this vehicle will cut out (like the ign. has been turned off) and will store a crank/cam error code (and data) we have not been able to see what is going on. the spark seems steady, and the injector pulse is s...
September 26, 2008
2003 Ford F-350 Super Duty XLT 6.0L No Start VIN: 1FTSW31P93
P0341: Camshaft Position Sensor Circuit Range/Performance. So I agreed to look at the truck, I asked her if it had started fine after the re-flash, she said yes for nearly 2 months, now it did "The same thing...". Oddly enough she drove the truck to my shop, she said "I tryed it once more waitng for the t...
September 26, 2008
1994 Pontiac Bonneville SSE 3.8L No Start, Cuts out, Stall, Poor Fuel Economy VIN: 1G2HZ5216R
P0341: crank/cam error. Good morning guys, and apologies for the long post here. It's been awhile since I've needed to ask for help here, but i have this stumper. the car came to me, with the complaint of stalling "violently", and then sometimes not re-starting. I had the c...
September 30, 2008
1995 Oldsmobile Cutlass Ciera 3.1L Hesitation, Cuts out, Misfire, MIL Lamp on VIN: 1G3AJ55M3S
P0341: camshaft position sensor extra cam pulses. ... at highway speeds with warm engine. can be easily duplicated in stall once warmed up. does not act up cold. service engine soon light comes on when acts up. code p0341 is present (cam sensor additional pulses). monitored cam sesnor signal on modis-signal g...
September 02, 2008
1997 Jeep Wrangler Sport 4.0L No Start VIN: 1J4FY19S7V
P0341: CMP sensor circuit problem. Vehicle cranks but no start after sitting for a period of time. Wait 1-2 days, vehicle starts fine and flags codes for CMP sensor and sometimes misfire #4. I have never personally seen this happen, only the codes. Replaced CKP and distributor, no change. Very ...
September 08, 2008
1997 Jeep Wrangler Sport 4.0L No Start VIN: 1J4FY19S7V
P0341: CMP sensor circuit problem. Vehicle cranks but no start after sitting for a period of time. Wait 1-2 days, vehicle starts fine and flags codes for CMP sensor and sometimes misfire #4. I have never personally seen this happen, only the codes. Replaced CKP and distributor, no change. Very ...
September 18, 2008
1995 Buick LeSabre Custom 3.8L No Start, Hesitation, Surge, Cuts out, Stall, MIL Lamp on VIN: 1G4HP52L88
P0341: cam crank sensor. ... codes p0341 and p1361 have replaced cam and crank sensors ign module no help
September 25, 2008
1994 Buick LeSabre Custom 3.8L Cuts out, Stall, MIL Lamp on VIN: 1G4HP52L3R
P0341: cam/crank error. Hi all, we have one here that we are at a loss on. this vehicle will cut out (like the ign. has been turned off) and will store a crank/cam error code (and data) we have not been able to see what is going on. the spark seems steady, and the injector pulse is s...
September 26, 2008
2003 Ford F-350 Super Duty XLT 6.0L No Start VIN: 1FTSW31P93
P0341: Camshaft Position Sensor Circuit Range/Performance. So I agreed to look at the truck, I asked her if it had started fine after the re-flash, she said yes for nearly 2 months, now it did "The same thing...". Oddly enough she drove the truck to my shop, she said "I tryed it once more waitng for the t...
September 26, 2008
1994 Pontiac Bonneville SSE 3.8L No Start, Cuts out, Stall, Poor Fuel Economy VIN: 1G2HZ5216R
P0341: crank/cam error. Good morning guys, and apologies for the long post here. It's been awhile since I've needed to ask for help here, but i have this stumper. the car came to me, with the complaint of stalling "violently", and then sometimes not re-starting. I had the c...
September 30, 2008