Join Now
International Automotive Technicians Network

P1340 Diagnostic Trouble Code Discussion for August 2008

Camshaft Position Sensor 'A' Circuit Malfunction (Bank 2)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P1340
Help Request Posted
2001 Volkswagen Passat GLX 4 Motion 2.8L MIL Lamp on VIN: WVWTH63B11
P1340: Camshaft/crank angle sensor wrong combination of ecus. ... bad, misfire, chug, etc. It set code p0340 first. So i checked cam sensors and crank, fuel pressure. Then i bought the tool and checked the timing belt alignment. Then i took it to Volkswagen and they told me the cam adjusters were on the wrong heads. So i...
August 08, 2008
2003 Saab 9-3 Arc 2.0L Poor Idle Quality, Surge, Misfire, MIL Lamp on VIN: YS3FD49Y73
P1340: Combustion detection signals CDM-T8 open/short. Performed diagnostic tests as instructed by AC Delco TDS, including checking for proper voltage at the ignition coils and activating the coils with the Tech2. Swapped coils and the misfire didn't follow. Replaced the ionization module as instructed by Delco. T...
August 29, 2008
2001 Volkswagen Passat GLX 4 Motion 2.8L MIL Lamp on VIN: WVWTH63B11
P1340: Camshaft/crank angle sensor wrong combination of ecus. ... bad, misfire, chug, etc. It set code p0340 first. So i checked cam sensors and crank, fuel pressure. Then i bought the tool and checked the timing belt alignment. Then i took it to Volkswagen and they told me the cam adjusters were on the wrong heads. So i...
August 08, 2008
2003 Saab 9-3 Arc 2.0L Poor Idle Quality, Surge, Misfire, MIL Lamp on VIN: YS3FD49Y73
P1340: Combustion detection signals CDM-T8 open/short. Performed diagnostic tests as instructed by AC Delco TDS, including checking for proper voltage at the ignition coils and activating the coils with the Tech2. Swapped coils and the misfire didn't follow. Replaced the ionization module as instructed by Delco. T...
August 29, 2008