Join Now
International Automotive Technicians Network

P0325 Diagnostic Trouble Code Discussion for February 2008

Knock Sensor 1 Circuit Malfunction (Bank 1)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0325
Help Request Posted
1995 Chevrolet Blazer 4.3L Poor Idle Quality, Surge, Cuts out, Stall, MIL Lamp on VIN: 1GNDT13W5S
P0325: knock sensor circut. I would like to thank you in advance this one is fun. start this from cold ect at 60 iat at 62 truck will run and idle good let it warm up to about 150 or so and it will start serging at idle I have disconected iac still serges removed egr and cleaned and inst...
February 06, 2008
1998 Nissan Maxima GLE 3.0L MIL Lamp on VIN: JN1CA21D3W
P0325: Knock Sensor Circuit Malfunction (Bank 1). I read a lot in archives about the knock sensor curcuit problems, so I'm not real concerned about that code. But with the IAT code, the black wire to the IAT sensor is melted. There is 2 wires for the IAT sensor, a black for ground that goes all the way to the...
February 12, 2008
2004 Dodge Intrepid SE 2.7L MIL Lamp on VIN: 2B3HD46R94
P0325: Knock Sensor 1 Circuit Malfunctions. this 2.7 sets a p0325 knock sensor code intermittent and i would like to know if anyones seen this one before and sugestions for testing due to intermittent nature. also tips for replace of sensor book shows to remove cylinder head but saw one post that said c...
February 13, 2008
1995 Chevrolet Blazer 4.3L Poor Idle Quality, Surge, Cuts out, Stall, MIL Lamp on VIN: 1GNDT13W5S
P0325: knock sensor circut. I would like to thank you in advance this one is fun. start this from cold ect at 60 iat at 62 truck will run and idle good let it warm up to about 150 or so and it will start serging at idle I have disconected iac still serges removed egr and cleaned and inst...
February 06, 2008
1998 Nissan Maxima GLE 3.0L MIL Lamp on VIN: JN1CA21D3W
P0325: Knock Sensor Circuit Malfunction (Bank 1). I read a lot in archives about the knock sensor curcuit problems, so I'm not real concerned about that code. But with the IAT code, the black wire to the IAT sensor is melted. There is 2 wires for the IAT sensor, a black for ground that goes all the way to the...
February 12, 2008
2004 Dodge Intrepid SE 2.7L MIL Lamp on VIN: 2B3HD46R94
P0325: Knock Sensor 1 Circuit Malfunctions. this 2.7 sets a p0325 knock sensor code intermittent and i would like to know if anyones seen this one before and sugestions for testing due to intermittent nature. also tips for replace of sensor book shows to remove cylinder head but saw one post that said c...
February 13, 2008