Join Now
International Automotive Technicians Network

P2614 Diagnostic Trouble Code Discussion for January 2008

Camshaft Position Output Circuit Malfunction


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P2614
Help Request Posted
2003 Ford F-350 Super Duty XLT 6.0L Poor Idle Quality, Surge, Cuts out, Stall, MIL Lamp on VIN: 1FTSX31P03
P2614: Camshaft Position Output Circuit Malfunction. Hi, truck came to me with a check engine light on, truck stumbles on a regular basis. Stalled on me once. Had 5 codes stored in memory with no hard codes on a koeo test. Did a koer test with no codes. Codes in memory were 401 1328 2285 2614 2617. On a road tes...
January 08, 2008
2003 Ford F-350 Super Duty XL 6.0L Poor Idle Quality, Stall, MIL Lamp on VIN: 1FDWF37P73
P2614: Camshaft Position Output Circuit Malfunction. Vehicle came in with cold start problem. It will hard start and stall, long cranking.If you crank over the engine and give it some pedal you can catch it and get it to start and after 30 seconds to a minute it will idle.it idles a little lumpy.once warmed up i...
January 22, 2008
2003 Ford F-350 Super Duty XLT 6.0L Poor Idle Quality, Surge, Cuts out, Stall, MIL Lamp on VIN: 1FTSX31P03
P2614: Camshaft Position Output Circuit Malfunction. Hi, truck came to me with a check engine light on, truck stumbles on a regular basis. Stalled on me once. Had 5 codes stored in memory with no hard codes on a koeo test. Did a koer test with no codes. Codes in memory were 401 1328 2285 2614 2617. On a road tes...
January 08, 2008
2003 Ford F-350 Super Duty XL 6.0L Poor Idle Quality, Stall, MIL Lamp on VIN: 1FDWF37P73
P2614: Camshaft Position Output Circuit Malfunction. Vehicle came in with cold start problem. It will hard start and stall, long cranking.If you crank over the engine and give it some pedal you can catch it and get it to start and after 30 seconds to a minute it will idle.it idles a little lumpy.once warmed up i...
January 22, 2008