Join Now
International Automotive Technicians Network

P0320 Diagnostic Trouble Code Discussion for September 2007

No Crank Reference Signal To PCM


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0320
Help Request Posted
1994 Ford Mustang 3.8L No Start, Cuts out, Stall VIN: 1FALP444XR
P0320: pip input circuit malfunction. need help from any ford guys out there, have this mustang that will run for about 3 to 4 mins when cold and then die. when it dies we lose injector pulse at the pcm. also keeps setting po320 pip input malfunction code. i'n not real falmiliar with this ford sys...
September 07, 2007
1997 Dodge B3500 5.9L Cuts out VIN: 2B5WB35ZXV
P0320: No Crank Reference Signal to PCM. this vehicle cuts out only when its in reverse driver great in drive
September 11, 2007
1996 Ford E-150 Econoline 5.8L No Start, MIL Lamp on, runs fine then dies VIN: 1FDEE14H6T
P0320: engin speed circuit malfunction. this van is new to us. came in, customer stopped to eat came out van wouldnt start we towed it to our shop. ran multiple tests replaced coil powertrain controll module ignition controll module distributer so on and such the only part not replaced was the trans...
September 12, 2007
1995 Mercury Grand Marquis GS 4.6L No Start, Stall, MIL Lamp on VIN: 2MELM74W6S
P0320: IDM signal not seen. ... Customer says it will stall and then be a no-start...I can only get a no start a few times..some times cold and some times hot.. It has fuel, spark, and injector pulse during the no-start.. really it is more like a start and die, start and die...part throt...
September 17, 2007
2002 Dodge Neon ES 2.0L No Start, MIL Lamp on VIN: 1B3ES26C42
P0320: No Crank Reference Signal To PCM. ... driving down the road.Customer says it cranks but will not start. Once it arrived it started for us(MIL Light ON) and has not died yet. I have two codes in the PCM. First code P0351(Ignition coil #1 primary ckt). THIS CODE SET THE MIL LIGHT. Second code P0...
September 27, 2007
1994 Ford Mustang 3.8L No Start, Cuts out, Stall VIN: 1FALP444XR
P0320: pip input circuit malfunction. need help from any ford guys out there, have this mustang that will run for about 3 to 4 mins when cold and then die. when it dies we lose injector pulse at the pcm. also keeps setting po320 pip input malfunction code. i'n not real falmiliar with this ford sys...
September 07, 2007
1997 Dodge B3500 5.9L Cuts out VIN: 2B5WB35ZXV
P0320: No Crank Reference Signal to PCM. this vehicle cuts out only when its in reverse driver great in drive
September 11, 2007
1996 Ford E-150 Econoline 5.8L No Start, MIL Lamp on, runs fine then dies VIN: 1FDEE14H6T
P0320: engin speed circuit malfunction. this van is new to us. came in, customer stopped to eat came out van wouldnt start we towed it to our shop. ran multiple tests replaced coil powertrain controll module ignition controll module distributer so on and such the only part not replaced was the trans...
September 12, 2007
1995 Mercury Grand Marquis GS 4.6L No Start, Stall, MIL Lamp on VIN: 2MELM74W6S
P0320: IDM signal not seen. ... Customer says it will stall and then be a no-start...I can only get a no start a few times..some times cold and some times hot.. It has fuel, spark, and injector pulse during the no-start.. really it is more like a start and die, start and die...part throt...
September 17, 2007
2002 Dodge Neon ES 2.0L No Start, MIL Lamp on VIN: 1B3ES26C42
P0320: No Crank Reference Signal To PCM. ... driving down the road.Customer says it cranks but will not start. Once it arrived it started for us(MIL Light ON) and has not died yet. I have two codes in the PCM. First code P0351(Ignition coil #1 primary ckt). THIS CODE SET THE MIL LIGHT. Second code P0...
September 27, 2007