Join Now
International Automotive Technicians Network

P0320 Diagnostic Trouble Code Discussion for July 2007

No Crank Reference Signal To PCM


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0320
Help Request Posted
2006 Mazda B2300 2.3L Misfire, MIL Lamp on VIN: 4F4YR12D36
P0320: Crankshaft Position Sensor Malfunction. ... in with MIL on; pulled codes- P0320 only. No pending codes. I checked the crank sensor and harness, and tried tapping on the sensor. Truck idled fine. I cleared code and road tested it. Drove A-OK. I told the customer I was going to order a crank sensor fr...
July 26, 2007
2006 Mazda B2300 2.3L Misfire, MIL Lamp on VIN: 4F4YR12D36
P0320: Crankshaft Position Sensor Malfunction. ... in with MIL on; pulled codes- P0320 only. No pending codes. I checked the crank sensor and harness, and tried tapping on the sensor. Truck idled fine. I cleared code and road tested it. Drove A-OK. I told the customer I was going to order a crank sensor fr...
July 30, 2007
1996 Ford Bronco Eddie Bauer 5.0L No Start, Stall VIN: 1FMEU15N9T
P0320: pip. ... This Bronco came in with a complaint of a intermitant Stalling/No start condition. It was towed in and would not start in the lot so I threw an ignition module in it and it started and I thought that was the end of it, but no. It died again so I pulled cod...
July 31, 2007
2006 Mazda B2300 2.3L Misfire, MIL Lamp on VIN: 4F4YR12D36
P0320: Crankshaft Position Sensor Malfunction. ... in with MIL on; pulled codes- P0320 only. No pending codes. I checked the crank sensor and harness, and tried tapping on the sensor. Truck idled fine. I cleared code and road tested it. Drove A-OK. I told the customer I was going to order a crank sensor fr...
July 26, 2007
2006 Mazda B2300 2.3L Misfire, MIL Lamp on VIN: 4F4YR12D36
P0320: Crankshaft Position Sensor Malfunction. ... in with MIL on; pulled codes- P0320 only. No pending codes. I checked the crank sensor and harness, and tried tapping on the sensor. Truck idled fine. I cleared code and road tested it. Drove A-OK. I told the customer I was going to order a crank sensor fr...
July 30, 2007
1996 Ford Bronco Eddie Bauer 5.0L No Start, Stall VIN: 1FMEU15N9T
P0320: pip. ... This Bronco came in with a complaint of a intermitant Stalling/No start condition. It was towed in and would not start in the lot so I threw an ignition module in it and it started and I thought that was the end of it, but no. It died again so I pulled cod...
July 31, 2007