Join Now
International Automotive Technicians Network

P0105 Diagnostic Trouble Code Discussion for May 2007

Absolute Pressure Sensor Circuit Malfunction


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0105
Help Request Posted
1996 Nissan Maxima SE 3.0L MIL Lamp on VIN: JN1CA21DXY
P0105: Absolute Pressure sensor CKT fault. Removed intake manifold to replace knock sensor. Only had knock sensor code. When I had the plenum off I noticed that theEGR port was blocked with carbon so I cleaned it out and put it all back together. Srarts and runs good but I now have a PO105. I found in ...
May 07, 2007
1996 Nissan 240SX 2.4L MIL Lamp on VIN: JN1AS44D7T
P0105: MAP/BARO sensor. Whave had this car come back 3 times for these 2 codes. We have tested all the connectors and wires from the ECM to the MAP/BARO sensor and switch and have found no problems. Have tested the voltage to the MAP/BARO sensor and was .435 with KOEO and .113 at idl...
May 16, 2007
1996 Nissan Maxima SE 3.0L MIL Lamp on VIN: JN1CA21DXY
P0105: Absolute Pressure sensor CKT fault. Removed intake manifold to replace knock sensor. Only had knock sensor code. When I had the plenum off I noticed that theEGR port was blocked with carbon so I cleaned it out and put it all back together. Srarts and runs good but I now have a PO105. I found in ...
May 07, 2007
1996 Nissan 240SX 2.4L MIL Lamp on VIN: JN1AS44D7T
P0105: MAP/BARO sensor. Whave had this car come back 3 times for these 2 codes. We have tested all the connectors and wires from the ECM to the MAP/BARO sensor and switch and have found no problems. Have tested the voltage to the MAP/BARO sensor and was .435 with KOEO and .113 at idl...
May 16, 2007