Join Now
International Automotive Technicians Network

P1309 Diagnostic Trouble Code Discussion for May 2006

Misfire Detection Monitor


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P1309
Help Request Posted
2000 Ford Ranger XL 4.0L MIL Lamp on VIN: 1FTZR15X1Y
P1309: misfire monitor fault. ... with a repeated P1309 code replaced cam sensor and shaft using proper tools #1 top dead center of compression stroke sensor pointing in some direction. Everything looked good. Checked code drove truck 10mins and the light came back on. Researched the IATN ...
May 08, 2006
2001 Ford Taurus SE 2-Valve 3.0L MIL Lamp on VIN: 1FAFP55231
P1309: Manufacturer controled ignition. ... in for the p1309 code for the cam position sensor. replaced the sensor and no change ligh came right back on within 10 miles cheaked wiring for both cam and crank sensors and tested both with vantage both have proper wave signiture.
May 22, 2006
2000 Ford Ranger XL 4.0L MIL Lamp on VIN: 1FTZR15X1Y
P1309: misfire monitor fault. ... with a repeated P1309 code replaced cam sensor and shaft using proper tools #1 top dead center of compression stroke sensor pointing in some direction. Everything looked good. Checked code drove truck 10mins and the light came back on. Researched the IATN ...
May 08, 2006
2001 Ford Taurus SE 2-Valve 3.0L MIL Lamp on VIN: 1FAFP55231
P1309: Manufacturer controled ignition. ... in for the p1309 code for the cam position sensor. replaced the sensor and no change ligh came right back on within 10 miles cheaked wiring for both cam and crank sensors and tested both with vantage both have proper wave signiture.
May 22, 2006