Join Now
International Automotive Technicians Network

P0344 Diagnostic Trouble Code Discussion for April 2006

Camshaft Position Sensor Signal Intermittent


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0344
Help Request Posted
1996 Ford F-250 XL 7.3L Stall, Poor Fuel Economy, MIL Lamp on, NO POWER VIN: 1FTHW26F3T
P0344: Camshaft Position Sensor Circuit Malfunction (Intermittent). hello to all the ford techs out there especially the power stroke guru`s.we have this diesel here with no power,it had a few codes in it (listed above)cleared codes and road tested,power is not to bad but it is lackings.i scanned data and noticed ebp sensor at...
April 13, 2006
2004 Dodge Intrepid SE 2.7L Hesitation, Cuts out, Stall, Misfire, MIL Lamp on VIN: 2B3HD46RX4
P0344: Camshaft Position Sensor Signal Intermittent. after replacing cam sensor performed wiggle test on all wiring. problem started after 4 to 5 miles before sensors was replaced-now starts after 15 to 20 miles. feels like fuel shutoff is accuated. replaced crank sensor due to failing of tap test. tighted pins ...
April 18, 2006
1996 Ford F-250 XL 7.3L Stall, Poor Fuel Economy, MIL Lamp on, NO POWER VIN: 1FTHW26F3T
P0344: Camshaft Position Sensor Circuit Malfunction (Intermittent). hello to all the ford techs out there especially the power stroke guru`s.we have this diesel here with no power,it had a few codes in it (listed above)cleared codes and road tested,power is not to bad but it is lackings.i scanned data and noticed ebp sensor at...
April 13, 2006
2004 Dodge Intrepid SE 2.7L Hesitation, Cuts out, Stall, Misfire, MIL Lamp on VIN: 2B3HD46RX4
P0344: Camshaft Position Sensor Signal Intermittent. after replacing cam sensor performed wiggle test on all wiring. problem started after 4 to 5 miles before sensors was replaced-now starts after 15 to 20 miles. feels like fuel shutoff is accuated. replaced crank sensor due to failing of tap test. tighted pins ...
April 18, 2006