P0336 Diagnostic Trouble Code Discussion for March 2006
Crankshaft Reference Sensor Performance
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0336
| Help Request | Posted | |
| 1999 Pontiac Grand Am GT 3.4L MIL Lamp on VIN: 1G2NW52E2X P0336: 24x refence performance. This vehicle will pop a code P0336 after the second ignition cycle every time it is cleared. Ran test, came down to bad 24x sensor. Replaced sensor, code comes back. Replaced again, code comes back. Then started throwing parts at it. Put in other crank sensor ... |
March 02, 2006 | |
| 1999 Pontiac Montana 3.4L Surge, MIL Lamp on, no tachometer VIN: 1GMDX03E3X P0336: Crank Sensor A 18x/24x Out Of Range. ... this Montana. Customer brought it in for MIL on and possible surge at cruise, plus no tach. Checked for codes, P0327 and P0336. P0327 is because of P0336. Verefied on scanner, no 24x crank signal, also no cam signal. Followed trouble chart, diagnosed as no... |
March 08, 2006 | |
| 2000 Pontiac Grand Prix GT 3.8L Stall, looses tach int. VIN: 1G2WP52K9Y P0336: Crankshaft Position Sensor Circuit Malfunction. The car loses the tach and the traction control light comes on. During the act up it loses the 18x signal from the ign. module to the pcm. But if you turn car off and restart everything works fine. The 3x,18x,and the cam signal going to the ing. module all loo... |
March 29, 2006 |
