Join Now
International Automotive Technicians Network

P0341 Diagnostic Trouble Code Discussion for August 2005

CMP Sensor Performance


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0341
Help Request Posted
1995 Oldsmobile Cutlass Ciera 3.1L Poor Idle Quality, Hesitation, Surge, Stall, Misfire, MIL Lamp on, chuggles VIN: 1G3AJ53M8S
P0341: intermitant cam signal. ... It sounds like it's running on 2 cylinders. We have replaced the cam sensor, crank sensor, MAF sensor, plugs, wires, ignition module, computer, and we checked the injectors to make sure they are all working. And still it runs like crap. When we first chang...
August 04, 2005
1994 Pontiac Bonneville SE 3.8L Cuts out, MIL Lamp on VIN: 1G2HX52L4R
P0341: cam crank error. Greetings to all I have recieved this car from a shop that has put in alot of new parts to try and repair it but they did not seem to find the problem.I did scan the ecm for codes and had two codes po341 po342.I have scoped the cam and crank sensors while the ...
August 15, 2005
2001 Isuzu Rodeo LS 3.2L Hesitation, Surge, Misfire, MIL Lamp on VIN: 452CK58D31
P0341: Camshaft Position Sensor Range/Performance. car came in with a cam sensor code. replaced sensor then test drove car seemed ok. cust drove car and said she feels like it has no power. drove car but can't tell if power is ok due to the fact it has a 4 cyl in it. I do feel a very slight surge when going up...
August 23, 2005
2003 Chevrolet Tahoe LT 5.3L MIL Lamp on VIN: 1GNEC13Z53
P0341: CMP Sensor Performance. ... on.Scanned computer found code p0341(camshaft position performance). checked connectors and no problems were found. also checked signal from sensor to computer with lab scope. signal looked pretty normal. replaced sensor wiht factory parts. light stayed of...
August 25, 2005
1995 Oldsmobile Cutlass Ciera 3.1L Poor Idle Quality, Hesitation, Surge, Stall, Misfire, MIL Lamp on, chuggles VIN: 1G3AJ53M8S
P0341: intermitant cam signal. ... It sounds like it's running on 2 cylinders. We have replaced the cam sensor, crank sensor, MAF sensor, plugs, wires, ignition module, computer, and we checked the injectors to make sure they are all working. And still it runs like crap. When we first chang...
August 04, 2005
1994 Pontiac Bonneville SE 3.8L Cuts out, MIL Lamp on VIN: 1G2HX52L4R
P0341: cam crank error. Greetings to all I have recieved this car from a shop that has put in alot of new parts to try and repair it but they did not seem to find the problem.I did scan the ecm for codes and had two codes po341 po342.I have scoped the cam and crank sensors while the ...
August 15, 2005
2001 Isuzu Rodeo LS 3.2L Hesitation, Surge, Misfire, MIL Lamp on VIN: 452CK58D31
P0341: Camshaft Position Sensor Range/Performance. car came in with a cam sensor code. replaced sensor then test drove car seemed ok. cust drove car and said she feels like it has no power. drove car but can't tell if power is ok due to the fact it has a 4 cyl in it. I do feel a very slight surge when going up...
August 23, 2005
2003 Chevrolet Tahoe LT 5.3L MIL Lamp on VIN: 1GNEC13Z53
P0341: CMP Sensor Performance. ... on.Scanned computer found code p0341(camshaft position performance). checked connectors and no problems were found. also checked signal from sensor to computer with lab scope. signal looked pretty normal. replaced sensor wiht factory parts. light stayed of...
August 25, 2005