Join Now
International Automotive Technicians Network

P1345 Diagnostic Trouble Code Discussion for April 2005

Camshaft To Crankshaft Position Correlation


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P1345
Help Request Posted
1998 Chevrolet Express 3500 5.7L Stall, MIL Lamp on, Severe spark knock VIN: 1GBHG31R0W
P1345: Camshaft To Crankshaft Position Correlation. ... the engine was blown, we replace with a NEW engine. After we had a sever spark knock , and a stall. We got the codes out and got P1345 , so we did diagnostic, and found the desired timing was out of spec, we replaced the distributor w/cam sensor, and re se...
April 18, 2005
1998 Chevrolet Express 3500 5.7L Stall, MIL Lamp on, Severe spark knock VIN: 1GBHG31R0W
P1345: Camshaft To Crankshaft Position Correlation. ... the engine was blown, we replace with a NEW engine. After we had a sever spark knock , and a stall. We got the codes out and got P1345 , so we did diagnostic, and found the desired timing was out of spec, we replaced the distributor w/cam sensor, and re se...
April 19, 2005
1998 Chevrolet Express 3500 5.7L Stall, MIL Lamp on, Severe spark knock VIN: 1GBHG31R0W
P1345: Camshaft To Crankshaft Position Correlation. ... the engine was blown, we replace with a NEW engine. After we had a sever spark knock , and a stall. We got the codes out and got P1345 , so we did diagnostic, and found the desired timing was out of spec, we replaced the distributor w/cam sensor, and re se...
April 18, 2005
1998 Chevrolet Express 3500 5.7L Stall, MIL Lamp on, Severe spark knock VIN: 1GBHG31R0W
P1345: Camshaft To Crankshaft Position Correlation. ... the engine was blown, we replace with a NEW engine. After we had a sever spark knock , and a stall. We got the codes out and got P1345 , so we did diagnostic, and found the desired timing was out of spec, we replaced the distributor w/cam sensor, and re se...
April 19, 2005