P0340 Diagnostic Trouble Code Discussion for May 2004
CMP Sensor Circuit Malfunction
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0340
| Help Request | Posted | |
| 1995 Ford E-350 Econoline 7.3L Hesitation, Stall, MIL Lamp on VIN: 1FDKE30F3S P0340: Cam sensor/CKT. Hello. I need help from a Power Stroke Pro. I’ve got a problem child here. It came in several months ago with a “power loss problem" during my inspection I found the bolts on both intake manifolds were loose (all of them), one exhaust doughnut from the man... |
May 04, 2004 | |
| 1997 Toyota Corolla 1.6L No Start VIN: 1NXBA02E5V P0340: Camshaft Position Sensor Circuit Malfunction. thanks in aadvance. I'm getting no spark,and I come up with to codes, crank and cam sensor. I checked fix database and some of the fix's were similar but not the same.I don't believe that the two sensors could go bad at the same time. I've checked wiring to ec... |
May 09, 2004 | |
| 2000 Dodge Neon ES 2.0L Misfire, MIL Lamp on VIN: 1B3ES46CXY P0340: Camshaft Position Sensor Circuit Malfunction. hi. It goes like this. damsel in distress stating that her car started bucking/jerking losing power but healed itself enough to get to the shop. a quick scan test revealed a history code 39 starts ago [po340].running fine at this time.while monitoring scan dat... |
May 11, 2004 | |
| 2001 Ford F-350 Super Duty Lariat 7.3L Stall VIN: 3FTSW31F21 P0340: Camshaft Position Sensor Circuit Malfunction. Truck came in, engine would stall, water in fuel light would come on after stall. Usually will start right back up and run fine. I changed the cam sensor after reading several posts stating that solved the problem. On the test drive after sensor replacement th... |
May 11, 2004 | |
| 1996 Suzuki Sidekick JX Sport 1.8L No Start VIN: J53TD21V5T P0340: Camshaft Position Sensor Circuit Malfunction. ... 1.8 snap-on sanner didnt cover suzuki in generic mode i got p0340 cam sensor dtc no rpms ecm will set codes if i unplug sensors i can clear the cam dtc and it will retrun on cracking the motor the cam sensor has 5v and a good ground not much on the signal |
May 21, 2004 |
