P0320 Diagnostic Trouble Code Discussion for February 2004
No Crank Reference Signal To PCM
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0320
| Help Request | Posted | |
| 2001 Ford F-150 Lariat 4.6L Hesitation, Cuts out, Stall, MIL Lamp on VIN: 2FTRX17W21 P0320: ignition faults. ... weeks ago with a CEL on and customer stated that it bucks and stalls. I retrieved the code and found a p1309 code. A new one to me I checked on "all data" to find out its an eratic ignition system fault and to check for two way radios interference.... |
February 03, 2004 | |
| 1996 Ford F-250 XL 4.9L Poor Idle Quality, Surge, Misfire, MIL Lamp on VIN: 1FTHF25Y2T P0320: Ignition diagnostic monitor. Performed scan, code PO320 and one other for cat efficiency present. Checked condition of ignition system. Replaced plugs, wires, cap, and rotor. Start and new code PO300 is present. Look at pip signal with labscope and is good. Engine cycles smooth then misfi... |
February 26, 2004 | |
| 1996 Ford F-350 Special 7.5L No Start VIN: 1FDKF37GXT P0320: PIP circuit failure. This truck either doesn't start, or starts and runs really bad. The customer already turned the distributor, but the timing seems to be erratic, even with the spout connector disconnected. My noid light on an injector is also erratic. Some times it flashes rea... |
February 28, 2004 |
