April 8, 2013 Here's a Tech Tip on a power distribution problem one member discovered on multiple vehicles. A 2004 Chevrolet Silverado exhibited illuminated "Service 4WD," ABS, and brake warning lamps, and two DTCs including U1041 and C0379. Read more about where this problem occurred and what was done to correct the issue here: http://autop.ro/4Bx

ABS, Service 4wd, loss of blower motor
I've run into 3 of these with identical problems recently so I'm guessing that there's lots more of these out there. Vehicle came in with Service 4wd message, ABS and Brake warning lamps on, and no blower motor operation. all problems occurred at the same ti

April 1, 2013 James from Florida replaces an Electronic Brake Control Module (EBCM) on a 2013 Chevrolet Volt, providing a unique perspective, including diagnostics and photos of the procedure.


2013 Chevrolet Volt EBCM replacement
I had the enviable oppurtunity of replacing an EBCM in a 2013 Volt. They are bolted to the BPMV in such a way that the BPMV and it's mounting bracket must be removed first in order to replace the EBCM. Here's a view before disassembly. Can you see the EBCM? [2

March 26, 2013 What do you think of our new search engine?



This is iATN's next generation search engine for the members of our professional automotive repair network.

March 22, 2013 Here's an extensive, 27-photo pictorial covering the replacement of the HVAC Multiplex Mode Actuator assembly on a 2011 Ford F-250, by Glenn from Louisiana.

2011 F-250 SD P/U - Multiplex Mode Actuator Assembly w Cable
www.iatn.net
2011 F-250 SD P/U - Multiplex Mode Actuator Assembly w CableInformational systems do not always supply us with a picture perfect course of action or a picture perfect ending. For instance: newer informational systems commonly lack real-life photos, pictures th

March 13, 2013 We're looking for feedback from members interested in sharing/discussing data files from their favorite pro tools on iATN. Specifically, we need sample data files from the tools you're using most. Check out the message on iATN below.

Next Gen File Uploader - Dev Forum
Hello all, We're upgrading the file library to support more rapid file uploads (drag-and-drop, mobile support), as well as the ability to support more file types, including automotive tool data files. What we're talking about here of course are the raw tool fi

March 12, 2013 Dan from Virginia wrote up a highly detailed overview on how one would go about setting up and/or purchasing Chrysler wiTECH, covering various licensing scenarios. Definitely worth a look if you're considering full support on Chrysler vehicles.

Chrysler wiTECH Purchase Information (New and Existing)
I contacted DCCTools, http://www.dcctools.com/en/index.html, and asked what it would cost to purchase the latested Chrysler scan tool. An account was created for me and, with the user ID and PW email, I received this: [wiTECH Special Instructions Email] Pay at

February 28, 2013 This edition of the iATN Review is packed with some great material posted to iATN over the last quarter. Inside you'll find a great writeup for those considering the purchase of Chrysler's wiTECH platform, an extensive pictorial covering the replacement of the HVAC MMA assembly on a 2011 Ford F-250, another nice write up with images on the replacement of the EBCM in a Chevrolet Volt, how to rebuild the EATC on an 02 F-250, Hyundai Fuel Evap diagnostic tips, Electronic throttle control diagnostic tips and to round things out, an article providing a great tip when addressing parasitic loads.

iATN Review Newsletter: First Quarter 2013 Edition
Includes: Chrysler wiTECH Purchase Information (New and Existing). 2011 F-250 - Multiplex Mode Actuator Assembly w/ Cable. 2013 Chevrolet Volt EBCM Replacement. 2002 Ford F150 EATC Control Head. ABS, Service 4WD, Loss of Blower Motor. Hyundai Evap... and more.

February 11, 2013 One of our longtime members, James from Florida, covers what the future holds for technicians and GM’s E-Assist. He has a great write-up on his recent repair experience replacing the SGCM on a 2013 Chevrolet Malibu. http://autop.ro/3BL


2013 Malibu E-Drive SGCM Replacement
I thought I'd post some pictures to show you what's coming your way in the near future. This is a 2013 Malibu with E-Assist technology. The vehicle came in with a low battery message on the DIC. Checking the 12 volt battery, KOER, 12.4 volts was the maximum re

February 7, 2013 We have a new member poll asking, "What % of revenue do you typically allocate for your annual training budget?" You can participate here: http://members.iatn.net/

Our last poll asked our members to compare their business in 2012 to the prior year. Of the 4,677 respondents, 45% stated their business was off in 2012, 20% stated about the same as in 2011, and 35% stated business had increased. Full details: http://autop.ro/3yh

January 31, 2013 For the Heavy Duty crowd, here is a tip about an 80-pin breakout box designed for Mercury marine engines which also works on some Ford and International HD truck engines.


IDM AND FICM BREAKOUT BOX
I wanted to share this with you guys. I have found and purchased a breakout box for a ford ficm, vt 365 dt 466. The break out box works on all dlc2 engines and will allow you to plug the harness in from engine and even allow you to plug a test idm on the truck