 Prev |
Professional Automotive Repair Technical Discussions for November 11, 2015 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2003 Dodge Sprinter 2500 2.7L No Start VIN: WD2YD642X3 OK, I need some help. This Sprinter died while driving. There is no hi pressure fuel. The PID on the scanner does not increase. The lo pressure pump pressure PID increases from 15 to 46 when I crank the vehicle. I took the regulator off the back of the fuel ra... |
View | |
| 2009 Dodge Durango SLT 5.7L No Start, PCM flashing VIN: 1D8HB48T29 Got new PCM from dealer. Trying to program pcm with techauthority and SPX VCI but no luck. When I start up chrysler J2534 Flash Application it goes to part number recovery mode. I follow steps and then it shows the following message, but pcm is not programmed ... Trouble codes: P1602 (PCM not programmed) |
View | |
| 1999 Jeep Grand Cherokee Limited 4.0L MIL Lamp on VIN: 1J4G268S0X On a recent trip to Lake Tahoe, this vehicle overheated due to failure of the radiator cooling fan to turn on. I was traced to a burned connector for the fan control module. It was during this overheating that the check engine light came on. I was forced to di... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2005 Dodge Grand Caravan SE 3.3L PRNDL Lights VIN: 1D4GP24R65 Sorry for the delay, just wanted to make sure the vehicle is fixed. After replacing the pcm everything is fine now. thanks for the replies. |
5 |
