 Prev |
Professional Automotive Repair Technical Discussions for September 6, 2015 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2005 Dodge Ram 2500 Laramie 5.9L Steering VIN: 3D7KS28C45 hi all,just had a steering issue with my truck.was backing up my trailer and cutting it right,not yet to the stops, and heard a pssst noise .then it would not steer to the left but the right is fine.i was straight enough to disconnect trailer and drove it home... |
View | |
| 2008 Ford Expedition XLT 5.4L Poor Idle Quality, Misfire VIN: 1FMFU16518 Customer had coils and plugs replaced three months ago ran great until 2 days ago .will start to misfire and run rough turns it off and restarts it will be fine for a while. coils have good power to them it has a code po356 in it but can't get it to run rough ... Trouble codes: P0356 |
View | |
| 1999 Mitsubishi Montero Sport LS 3.0L Alternator VIN: JA4LS31H8X Hello all this vehicle will stop charging intermittently the battery light will come and lights will dim not sure if it is a short or a ground problem is there any common issue with these vehicles this is the 4th alternator replaced I am trying to help a frien... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2005 Dodge Ram 2500 Laramie 5.9L recirc door VIN: 3D7KS28C45 hi all and thanks for the replies.sorry I haven't had time to try anything other than hoping after so many key cycles it would reset itself.it has not.steering went out so im dealing with that.thanks again,rick |
7 | |
| 2004 Porsche Cayenne S 4.5L No Start, MIL Lamp on after checking all powers and grounds, I jumped the fuel pump relays and still was getting 0psi. I pulled the feed line on the right pump and saw I was getting very low psi but a decent volume. made the call to change the pumps complete assembly as the last sh... Trouble codes: P0335 (p0336-), P0336 (testing and results). |
5 |
